|
The NetMan network agent allows UPS management across a LAN using any of the main network communication protocols - TCP/IP, HTTP and network interface (SNMP).
|
|
|
PowerShield³ provides efficient, user-friendly UPS management using bar chart displays to show major operational information such as the input voltage, UPS load % and batteries charge %.
|
|
|
The MultiCom 351/352 is a serial duplexer that allows two devices to be connected to a single serial port on a UPS.
It can be used where numerous serial connections and multiple polling of UPS are required, and is ideal for LAN networks with a firewall.
|
|
|
Multi-Switch improves electrical supply continuity. The principle of operation guarantees a higher reliability level than that achieved using a single UPS (on-line with automatic bypass) or several UPS in parallel.
|
|
|
The MultiCOM 301/302 protocol converter may be used to monitor the UPS using the MODBUS/JBUS protocol on RS485 or RS232 serial line. It will also manage a second, independent RS232 serial line that can be used to connect other devices such as the Netman 101 or a PC that uses the PowerShield² software.
|
|
|
Special purpose accessories.
|
|
|
Multi PASS is a maintenance bypass to allow a ups to be powered down and removed for service without disruption to the connected load(s).
Multi PASS has both manual and automatic transfer function. If the UPS is accidentally disconnected or fails any load(s) connected to Multi PASS are automatically transfered to the mains supply.
|
|
|
The Netman environmental sensors monitor and record environmental conditions as well as activities in protected areas and at the premises where the UPS is installed.
|
|