| |
|
|
|
|
|
|
Software and Accessories |
 | | MultiCOM 362 Provides a UPS with an additional RS232 serial interface or USB port. The USB port allows the UPS to communicate with Apple Macintosh computers as well as Windows and Linux operating systems.
Characteristics
• compatible with USB 1 or 2
• compatible with PowerShield².
|  | | MultiCOM 372 Provides a UPS with an additional RS232 serial interface port. The card has Emergency Power Off (EPO) and Remote Shut Down (RSD) inputs with terminal connections.
Characteristics
• EPO and UPS shutdown interface
• 12Vdc 80mA contact option. |  | | MultiCOM 382 Provides a set of relay contacts to provide UPS alarm and status indication.
The contacts are connected through terminal connections. Signal contacts include Emergency Power Off (EPO), Remote Shut Down (RSD), On Battery, On Bypass, Alarm and Low battery. The contacts are change over or normally open.
Characteristics
• max. 3A current at 250Vac
• signal contact customisation. |  | | Multi I/O Has configurable input and output signal contacts to allow UPS integration with control systems.It can be used to connect two devices to a single UPS serial communication port. It can also communicate using the MODBUS/JBUS protocol on RS485 lines. Characteristics
• 8 analog/digital inputs
• 8 relay outputs to monitor UPS and mains status
• it can control two independent RS232/RS485 serial lines to monitor the UPS and its operating states using the MODBUS/JBUS protocol
• firmware upgradeable through the serial port. |  | | RS232-USB converter Allows UPS without a USB port to connect to Macintosh, Windows and linux PCs with this type of port.
Characteristics
• compatible with USB 1.2
• compatible with PowerShield².
for more detail and data sheet go to downloads categories | |
|
|
|
| |